Mountain Driving 101: Video series guides truck drivers in the mountains

Drivers exposed to long mountain grades for the first time face a dilemma. They may not be aware of the physical limitations of their equipment to keep them at a safe speed during the descent. They probably won’t be aware of the profile of the grade, or where the steeper sections are, so they won’t be able to determine a safe speed for the descent.

(Photo: Volvo Trucks North America)

They may also be led down a dangerous path by observing the speed of other trucks on the hill. Those trucks may be empty or loaded lightly compared to their own truck. If they follow the guidance found in many commercial driver training manuals, they may under the assumption that snubbing the brakes or maintaining a constant light brake application pressure is the correct way to descend a long grade. That too might be a mistake from which there is no turning back.

And then there’s old adage, “come down the hill in the same gear you went up.” Well, that’s not much use to you if you never climbed that hill before. And will today’s engines with all their torque and horsepower, you’ll be climbing faster than you should be descending anyway. Forget what you think you know about driving in mountains. This video series explains how it should be done.

Mountain Driving 101 — a four-part training series produced by Today’s Trucking, and sponsored by Volvo Trucks North America — explains how to safely descend any grade without using any service brake at all, relying instead on the correct gear selection and proper use of the engine brake.

The series is split into four episodes for easier consumption and better retention. Each covers a specific topic related to the subject of mountain driving.   

Episode 1 explains the fundamentals of how brakes work, why they get hot and how that affects braking performance.

Episode 2 covers the brake walk-around drivers should conduct to verify the brakes are in good working order before heading down a long steep grade.

Episode 3 offers a deeper understanding of the warning signs commonly found on roads in mountainous areas, as well as the proper operation of a Volvo I-Shift automated transmission and the Volvo engine brake to maintain a safe speed during a descent.

Episode 4 brings together all that insight for a drive down a 6-mile (10 km) 7% grade called the Blueberry-Paulson Hill, located in the Kootenay Mountains near Castlegar, B.C..

Our mountain driving instructor, Andy Roberts, brings more than 30 years of mountain driving experience to this production. He’s the owner and president of the Castlegar-based commercial vehicle driving school, Mountain Transport Institute. He has been instructing his students in proper mountain driving techniques for more than 15 years.

  • Newcom Media thanks Volvo Truck North America for supporting this video and helping to make mountain driving a safer and more enjoyable experience.

Software transportes 3000